Rain spray application makes your vision clearer, making your driving safer. Automotive rain spray products create a hydrophobic effect on glass. In this way, water droplets on the glass are pushed away from the glass surface, preventing them from sticking to the glass. There are many different brands of automotive rain spray products. In this article, we will talk about the rain repellent spray application.

A clearer view and safer driving are waiting for you with rain slider spray applications. Car rain repellent spray products provide hydrophobic coating. The water-repellent, that is, hydrophobic, coating on the glass pushes the water drops from the glass surface and prevents them from sticking to the glass. Nano glass water repellent sprays contain silica nanoparticles. These particles remove water and liquids from the glass surface. Do you know how important the car rain slider is? The 34% visibility to be achieved with the rain slider can provide braking 18 meters beforehand at the braking distance. A huge security difference! Good visibility in rainy weather is important for safe driving. However, keeping your windshield clean takes more than just a good wiper assembly.

You know your car can have a hard time when it rains because the driver can’t see the cloudiness caused by the dirty stained rain and the windshield wipers. Whether it’s a simple shower or a prolonged puddle, your windshield poses a hazard. Sure, you can and should use windshield wipers, but they are not always effective.

Glass water repellent spray benefits

When you apply glass water repellent spray to the windshield of your vehicle, you can basically get the following benefits.

Makes it easier to clean the windshield in harsh winter conditions such as snow and ice.

It improves the quality of vision when driving at night. Because it prevents the glare on the glass and the prism effect.

Prevents dirt and dust from adhering

Does not damage glass

Improves vision quality

Reduces the risk of accidents

Contributes to easier cleaning of insects such as flies and insects from the glass.

Improves wiper performance

One of the advantages of using rain repellent is that it helps protect your vehicle from harmful pollutants such as acid water and increases driver visibility. It works by creating a protective shield that allows rain to flow naturally off the surface of the glass. This is further enhanced when traveling at speeds over 20 km, as the wind speed helps to displace the water. If applied correctly, you will have very little use for car windshield wipers. Another benefit of rain repellency is that it is extremely useful in winter conditions, as it prevents ice build-up to protect your windshield from frost. TRUE. No more than rubbing windows in freezing conditions! Let’s come to the answer to the question of how to apply the rain slider!

Although car detailers recommend using rainproof repellent, there is also a downside. The correct first application requires some patience for the product to properly fit and adhere to the glass.

First of all, you need to thoroughly prepare the surface before applying the product. You need to keep the glass free of contaminants. Using a good glass cleaner or glass polish can achieve this. When you are satisfied with the cleanliness of the glass, you can proceed to the application. How to make a rain slider?

Then spray the glass rainproof evenly, then gently massage the product using a sealing applicator and leave it to absorb. You should repeat the process two or three times for best results, as more layers give a better lasting effect.

For about 10-15 minutes, you should see the glass begin to haze and look smudged. This means that the product is in the final stage of adhesion to the glass. After another 5 minutes, use a lint-free microfiber cloth to remove any residue. After removing any remaining traces, use another fresh microfiber cloth to polish the glass to a high shine.

While we admit that applying rain repellent can be a bit of a hassle, it’s definitely worth it. Once you get used to driving in wet weather with a rainproof treatment, it will be very difficult to go back to an untreated windshield. On the other hand, the application is not limited to the windshield. The side window, rear window and mirrors can also be processed in the same way.

Rainwater repellent products can provide incredibly effective results. The auto rain slider creates a protective armor over the glass of your windshield and allows the rain to escape naturally rather than being scratched by the wipers. This means fewer streaks and scratches, longer wipers and more consistent visibility when traveling in rough weather. Keeping your view clear not only makes your journey safer, it also gives you the confidence that you are safer. It provides a perfect combination of real protection and psychological protection!

Think about the amount of time your windshield wipers spend each year pushing forward and backward on your windshield and rear windows. They leave marks behind, tiny particles of sand on the blades of the wiper blades, and shine on oncoming lights, changing your view. But if you don’t use your wipers often, doesn’t that mean dirty glass? What if applying something rainproof to your windshield could make it easier for you to clean your car windows, or even clean yourself?

Think for a minute. Rain is drawn off your windshield with this microscopic coating designed to increase your visibility. Rain slide film repels water drops from the surface. Hydrophobic coatings are both water-repellent and dirt-repellent. Dirt adheres to the water droplets and is absorbed as they roll, cleaning the glass surface without lifting a finger.

Although there are different brands, the answer to the question of how to use rain repellent spray is generally common. The surface on which the rain repellent spray will be applied must be thoroughly cleaned. In addition, there should be no dust, oil, dirt and detergent residue.

Shake the bottle well to apply the water repellent glass coating spray. Then spray the surface with water-repellent glass coating spray. Spread it well on the glass by making circular movements with a microfiber cloth and feed it. Then let it dry. After 10 minutes, the product will be fully activated.